HBQ-G206 is a fully automatic photovoltaic cutting, riveting, twisting and winding cable tie processing machine, including cutting (stripping), terminal riveting, connector nut tightening, wire tie and other functions. The whole machine layout adopts modular design, high efficiency, easy debugging. And there are detection functions: such as wire alignment detection, cable stripping detection, pressure management detection, wire connector not in place detection, nut gap visual detection, to ensure the quality of customers' finished products is reliable, no defective products flow out, automatic grasp of the robot, cable winding, automatic tightening of the cable tie and cut off the tail of the cable, conveying material under the line, etc.

HBQ-G206 photovoltaic wire harness automatic wire machine, the whole machine includes a set of cutting, riveting and screwing host, a set of pay-off rack, a set of wire storage rack, a set of wire winding and binding machine, the host can process 200-1800mm long wire, general diameter φ5.7~φ6.3 (1×4mm²) photovoltaic cable, pay-off rack can bear a maximum of 1000Kg coil (drum) material.

●High integration: set cutting line, peeling, crimp terminals, connector nut tightening, winding, tying tape, tying tape tail material removal as a whole;

●High quality:Pressure management detects terminal crimping quality;

●High precision:wire accuracy L < 500mm±1mm; L > 500mm (1mm+0.2%L)

The diameter accuracy of the winding is ±10mm, and the tail material of the cable tie is removed by 1mm;

●User-friendly operation: wire feeding length and peeling length can be adjusted by parameter setting, product replacement can be switched by touch screen and run the corresponding program, and different length products and winding needs can be switched with different formulas;

• 

  HBQ-G102 Nut tightening machine apply to photovoltaic and energy storage connector wire harness

  HBQ-G102 Nut tightening machine is a new generation of semi-automatic connector nut tightening equipment. The equipment is mainly composed of servo motor, encoder, PLC, photoelectric sensor and cylinder. The equipment has the function of error-proofing and fool-proofing. When the wrong products are put into the equipment, the equipment will not respond to start, which can effectively prevent the defective products from flowing into the next process. It has high tightening accuracy, simple operation, and stable performance, and saves manpower effectively. 查看详情
  HBQ-G102 Nut tightening machine apply to photovoltaic and energy storage connector wire harness
• 

  HBQ-G203 New Energy Wire Processing Machine

  HBQ-G203_ The cutting, riveting and screwing integrated machine is a full-automatic photovoltaic cutting, riveting and screwing processing equipment. Its functions include cutting (stripping), terminal riveting, connector assembly, connector nut tightening and other functions. The overall layout adopts one out of two modular design, with high efficiency and convenient debugging. The equipment is mainly used for the assembly of photovoltaic panel end connectors, which can realize real-time monitoring of important processes, such as wire alignment detection, pressure management detection, solder visual detection Detect if the wire is not properly threaded through the connector, visually inspect the nut gap, etc., to ensure the reliable quality of the customer's finished products and reduce the outflow of defective products. 查看详情
  HBQ-G203 New Energy Wire Processing Machine
• 

  HBQ-G205 Photovoltaic Connector Automatic Assembly Machine

  HBQ-G205 is a fully automatic photovoltaic connector automatic assembly equipment, the layout of the whole machine adopts one out of a modular design, high efficiency, easy to debug, the equipment is mainly used for photovoltaic panel end connector assembly. Each assembly process is inspected, with O-ring assembly in place detection, waterproof inner plug skew detection, plastic nut tightening torque detection, plastic nut tightening gap detection. Each assembly process is inspected, with O-ring assembly in place detection, waterproof inner plug skew detection, plastic nut tightening torque detection, plastic nut tightening gap detection, bayonet and card Angle fracture/damage/missing detection, finished product 360-degree surface scratch/indentation/deformation detection, to ensure that customers finished product quality is reliable, no defective products out. HBQ-G205 machine includes: host, parts automatic loading system, CCD visual inspection system, laser marking system (optional), can be applied to all the same type of photovoltaic connector automatic assembly. 查看详情
  HBQ-G205 Photovoltaic Connector Automatic Assembly Machine
• 

  HBQ-G207_Cutting and Riveting and Screwing Positive and Negative Machine

  HBQ-G207 is a fully automatic photovoltaic wire cutting and riveting processing equipment that can process both ends of photovoltaic connectors. Its functions include cutting (peeling), double-end terminal riveting, assembly of connectors at both ends, and tightening of connector nuts at both ends. The overall layout adopts modular design, achieving short line turning and long line swing U dual processing mode, with high efficiency and convenient debugging. This equipment is equipped with wire alignment detection, pressure management detection, solder visual detection, wire threading connector penetration detection, and nut gap visual detection, ensuring reliable quality of customer finished products and no defective products flowing out. 查看详情
  HBQ-G207_Cutting and Riveting and Screwing Positive and Negative Machine
• 

  HBQ-G206 Photovoltaic Harness Automatic Machine

  HBQ-G206 is a fully automatic photovoltaic cutting, riveting, twisting and winding cable tie processing machine, including cutting (stripping), terminal riveting, connector nut tightening, wire tie and other functions. The whole machine layout adopts modular design, high efficiency, easy debugging. And there are detection functions: such as wire alignment detection, cable stripping detection, pressure management detection, wire connector not in place detection, nut gap visual detection, to ensure the quality of customers' finished products is reliable, no defective products flow out, automatic grasp of the robot, cable winding, automatic tightening of the cable tie and cut off the tail of the cable, conveying material under the line, etc. HBQ-G206 photovoltaic wire harness automatic wire machine, the whole machine includes a set of cutting, riveting and screwing host, a set of pay-off rack, a set of wire storage rack, a set of wire winding and binding machine, the host can process 200-1800mm long wire, general diameter φ5.7~φ6.3 (1×4mm²) photovoltaic cable, pay-off rack can bear a maximum of 1000Kg coil (drum) material. 查看详情
  HBQ-G206 Photovoltaic Harness Automatic Machine